He aha ka ʻokoʻa ma waena o hoʻokahi ʻīniha wili wiliwili ʻia me ka wili kuʻuna?

He aha ka ʻokoʻa ma waena o hoʻokahi ʻīniha wili wiliwili ʻia me ka wili kuʻuna?

Hoʻokahi-ʻīniha dip-welded uea mesh i hana ʻia me ka uea kila haʻahaʻa haʻahaʻa Q195 kiʻekiʻe, i hoʻopaʻa ʻia a palaki ʻia ma luna o ka ʻili, a uhi ʻia me ka papa plastik PVC. Loaʻa iā ia ka hoʻopili maikaʻi ʻana i ka uea mesh, ʻili maʻemaʻe mesh, ʻaʻahu mesh, a me nā hui solder. Hiki ke hoʻopilikino ʻia nā kala e like me nā koi maoli.

Hoʻokahi ʻīniha luʻu i wiliwili ʻia

Ke kaʻina hana: Hoʻokahi ʻīniha dip-welded welded wire mesh i hana ʻia me ka uea kila haʻahaʻa haʻahaʻa Q195 kiʻekiʻe. Hoʻopili ʻia ka ʻili a hoʻopaʻa ʻia me ka uhi plastik PVC. ʻO ka hoʻopili maikaʻi ʻana me ka uea mesh, ʻili maʻemaʻe maʻemaʻe, mesh like ʻole. Paʻa nā hui solder, maikaʻi ka hana hoʻoponopono kūloko, kūpaʻa, a maikaʻi ke kūpaʻa corrosion. Hiki ke hoʻopilikino ʻia ke kala e like me nā koi maoli.

Nā kikoʻī maʻamau:

Anawaena uwea: 2.5-5.0mm

Mesh: 25.4-200mm

Hiki i ka laulā kiʻekiʻe ke hiki i ka 3m, a hiki ke hoʻololi i ka lōʻihi e like me nā koi maoli o nā mea kūʻai.

1. Ka ʻike a me ka hoʻohana ʻana i ka pauka luʻu

1. ʻO ka polyethylene thermoplastic powder coatings, ka mea i ʻike ʻia he polyethylene powder resin coatings, he anti-corrosion powder coatings i hoʻomākaukau ʻia mai ka polyethylene kiʻekiʻe (LDPE) ma ke ʻano he kumu kumu a hoʻohui i nā mea hoʻohui like ʻole a me nā kala. He maikaʻi impregnation waiwai uhi. Loaʻa iā ia ke kūpaʻa kemika, ka pale ʻana i ka wā kahiko, ka pale ʻana i ka hopena, ke kūlou ʻana, ka pale ʻana i ka waikawa, ka pale ʻana i ka corrosion paʻakai a me ka hana hoʻonaninani ili maikaʻi.

2. Nā kūlana impregnation maʻamau:

1. Ma hope o ka maloʻo ʻana o ka mesh a me ka degreased, ua wela ia i 350 ± 50 ° C (ʻo ka mahana wela kikoʻī e pili ana i ka wela wela o ka mesh, i hoʻoholo ʻia e ka hoʻokolohua).

2. Hoʻokomo ka pepa mesh i hoʻomoʻa ʻia i loko o ka moena wai no 10-12 kekona, ua hoʻokiʻekiʻe ʻia ka mahana i 150 ° C-230 ° C, lawe ʻia ka ʻili a hoʻohaʻahaʻa ʻia, a loaʻa ka pepa mesh i hoʻoheheʻe ʻia ma hope o ka hoʻoilo.

ʻO kekahi pauka plastik i hoʻoheheʻe ʻia ʻaʻole pono kahi moena wai.

3. ʻO ke kumu nui:

Alanui pa mesh, railway pa mesh, airport pa mesh, kihapai pa mesh, kaiaulu pa mesh, villa pa mesh, kīwila hale pa mesh, lako lako hana, kolamu hīnaʻi, haʻuki a me ka pono lako, etc., paka, kaiāulu a me nā pā 'ē aʻe, paikikala hīnaʻi , Shelves, Hangers, Refrigerators, Grille Surface Coating.

4. Nā hiʻohiʻona:

ʻO ka mānoanoa impregnated ma waena o 0.5-3mm, me ke kūpaʻa ikaika o ka hopena, ka wā pale lōʻihi, nani a paʻa.

ʻO nā waihoʻoluʻu o ka mesh dip-welded me: ʻeleʻele uliuli, mauʻu uliuli, ʻeleʻele, ʻulaʻula, melemele a me nā waihoʻoluʻu ʻē aʻe no nā mea hoʻohana e koho. Hoʻohana kēia huahana i kahi ʻōnaehana pale pālua ʻelua e hoʻokō i ka adhesion maikaʻi loa, ka waihoʻoluʻu a me ke kala piha. ʻAʻole hiki ke hoʻomaikaʻi nui i ke ola lawelawe o ka mesh, akā hoʻomaikaʻi hoʻi i ka nele o ka hopena hoʻonaninani o ka wela-dip galvanized welded mesh.

Mesh wiliwili maʻamau:

Hoʻopili ʻia ka uea i hoʻopaʻa ʻia i ka plastik me ka electroplating a i ʻole ka uea hao wela, a laila hoʻopaʻa ʻia me ka pauka PVC ma o kahi laina hana kiʻekiʻe wela. Hoʻohana nui ʻia no nā hale kūʻai hale kūʻai, nā mea hoʻonaninani i loko a me waho, ka hānai manu, nā pua a me nā lāʻau. ʻO nā ʻupena pā, nā pā pā o waho no nā villa a me nā hale, loaʻa nā huahana i nā hiʻohiʻona o nā kala ʻālohilohi, nā hiʻohiʻona nani, anti-corrosion a me ka anti-rust, non-fading, anti-ultraviolet a pēlā aku.

Hiki i kā mākou hale hana ke hana i nā huahana mesh welded plastic mesh i nā kala like ʻole, ka mea nui me: ʻeleʻele uliuli, mauʻu uliuli, ʻeleʻele, ʻulaʻula, melemele a me nā kala ʻē aʻe no nā mea hoʻohana e koho. Hoʻohana kēia huahana i kahi ʻōnaehana pale pālua ʻelua e hoʻokō i ka adhesion maikaʻi loa, ka waihoʻoluʻu a me ke kala piha.