Why is the security of airport fence so high?

The airport has relatively strict requirements for airport fences, especially in terms of safety performance. If errors occur during use, the consequences will be very serious. However, airport fence generally does not disappoint everyone. It is very good in all aspects, which will become clear after reading the following content.
The airport fence net, also known as the "Y-shaped safety protection net", is composed of V-shaped bracket columns, reinforced welded sheet nets, security anti-theft connectors and hot-dip galvanized blade cages for high strength and high safety protection. In recent years, it has been widely used in high-security places such as airports and military bases. Note: If razor wire is installed on the top of the airport guardrail, the safety protection function will be greatly enhanced after the razor wire.
Using anti-rust methods such as electroplating, hot-dip plating, plastic spraying, and plastic dipping, it has excellent anti-aging, sun resistance, and weather resistance. Its products have beautiful appearance and various patterns, which not only have the effect of fence, but also have the effect of beautification. Due to its high safety and good anti-climbing ability, the mesh connection method uses special SBS fasteners to effectively prevent artificial destructive removal. The four horizontal bending reinforcements significantly increase the strength of the mesh surface.

airport fence
airport fence

Raw material: high quality low carbon steel wire. Standard: Use 5.0mm high-strength low-carbon steel wire for welding.
Mesh: 50*100mm 50*200mm.
The mesh is equipped with V-shaped reinforcement ribs, which can greatly increase the impact resistance of the fence.
The column is 60*60 rectangular steel with a V-shaped bracket welded to the top. Or just use 70mm*100mm column connection columns. The products are all hot-dip galvanized and then electrostatically sprayed with high-quality polyester powder, using the world's most popular RAL colors.
Connection method: Mainly use M card and hold the card to connect.
Surface treatment: electroplating, hot plating, plastic spraying, plastic dipping.
Advantages:
1. It is beautiful, practical, and convenient to transport and install.
2. The terrain should be adapted to the terrain during installation, and the connection position with the column can be adjusted up and down according to the unevenness of the ground; 3. Install four bending reinforcements in the transverse direction of the airport fence net, so that the overall cost will not increase much. The strength and beauty of the mesh have been significantly increased, making it one of the most anticipated products at home and abroad.
Main uses: Prisons, airport closures, private areas, military areas, field fences, development zone isolation nets.
Manufacturing technology: pre-straightening, cutting, pre-bending, welding, inspection, framing, destructive testing, beautification (PE, PVC, hot dip), packaging, warehousing.


Post time: Nov-22-2023