Usually in order to strengthen the wall, many use reinforcing mesh mixed with concrete in the wall to achieve better reinforcement effect. In this way, the entire wall can be reinforced against bending and earthquake resistance, which can significantly improve the load-bearing capacity of the reinforced beams and prevent the occurrence of cracks. After using reinforced concrete columns, the wall's bearing capacity, energy consumption and ductility coefficient have been improved, and it also has earthquake resistance, crack resistance and anti-falling properties.
With the help of these advantages and characteristics of reinforcing mesh, if the steel mesh is laid on the wall of the building, the cracking of the wall will be reduced accordingly, and the seismic performance can also be enhanced. Therefore, the steel mesh is indispensable in construction projects. Less building materials.
Reinforcing mesh can enhance its stability and corrosion resistance by cold plating (electroplating), hot dip, and PVC coating on the surface of the raw materials (high-quality low carbon steel wire or rebar), plus a uniform grid and strong welding Points, good local workability, so that the steel mesh on the exterior wall of the building can provide good isolation and protection, has good advantages in wall isolation and use of walls.
The mechanical properties of reinforcing mesh have almost no change before and after welding. The advantages of reinforcing mesh are fast forming speed, stable quality, uniform spacing between horizontal and vertical steel bars, and strong connections at intersections. It should be noted that the spacing and diameter of the steel bars in the vertical and horizontal directions can be different, but the steel bars in the same direction should have the same diameter, spacing and length.
Welding reinforcing mesh plays an important role in the quality of the reinforcement project, the construction speed is also improved, and the crack resistance of the concrete is improved. Reinforcing mesh has the comprehensive characteristics of high efficiency and energy saving. It is a new building material used to reinforce concrete structures and has very good comprehensive economic benefits. It has been widely used in the modern construction industry and has replaced the previous manual method of tying steel bars on site.
The most unique advantages of reinforcing mesh are its strong weldability, corrosion resistance, oxidation resistance and strong prestressing. Simplify the project quantity and shorten the construction period. Generally speaking, 33% of steel can be saved during the construction process, the cost can be reduced by 30%, and the construction efficiency can be increased by 75%.
It not only speeds up the construction, but also ensures safety. The noise pollution problem generated during the project construction process has been further solved, and it promotes civilized construction on the site.
Reinforcing mesh is used in municipal facilities: viaduct paving, concrete pipes, walls, slope protection, etc.; water conservancy and electric power equipment: water conservancy equipment, dam foundations, protective nets, etc. Reinforced mesh is also used in other fields: flood control equipment, slope reinforcement, anti-collapse protection, aquaculture, animal husbandry, etc. In short, the application range is relatively wide.
Post time: Jan-18-2024